Datasheet / Installation diagramsAED-2000-D2 incorporates two relay outputs that can switch various load but primarily motorised blinds or shades. When AED-2000-D2 is connected and powered up,
the blinds can be controlled by moving the hand in front of the switch plate sensing area in upward or downward direction. When the hand is moved in upward direction,
UP relay activates. It remains activated for 40s or until another move of the hand stops it. When the sensor detects movement in downwards direction, DOWN relay
activate.
It can be used to control two loads (blinds motors) up to 450W @ 240V. It is intended for installation in a standard 68mm round European wall box.
British Standard wall box (min. depth: 40mm) mounting option is also available. The switch requires a neutral connection and has no minimum load.
Important: If you intend to mount this unit into a round wallbox using screws, please choose the version with correct orientation, depending on the screw position in your wallbox:
Maxuimum load: 2x 450 W
Minimum load: 0W
Voltage: 240V /50Hz
Detection range Adjustable: 2-6cm
Mounting: 68mm standard European wallbox (British Standard wall box option available)
Wire connection: Screw terminal for wires up to 2,5mm2